Videos with the 3D Printizer

22 September 2014 - Printing with PETG filament

22 September 2014 - Playing with a part printed with PETG filament

10 December 2013 - #3 printing #5

11 November 2013 - Cooling parts with a fan

9 August 2013 - Printing PLA on white glue

9 August 2013 - Printing PLA on a cold bed with dry PVA

9 August 2013 - Printing PLA on a cold bed with wet PVA

2 August 2013 - Removing PLA parts from a masking tape cold bed

2 August 2013 - Printing PLA on a cold bed with masking tape

31 July 2013 - Printing ABS on a cardboard with no heated bed

31 July 2013 - ABS sticks very well to a regular A4 paper

27 July 2013 - Repraper PLA sticks very well to masking tape

4 June 2013 - Trying odd shapes

2 May 2013 - Printing at high speeds - 300 mm/s

1 May 2013 - Printing at high speeds - 275 mm/s

30 April 2013 - second print